Motors designed to work in 4” or wider wells, suitable to be used in clean water.

 

BUILDING FEATURES:

• Rewindable 2-pole asynchronous motor with airtight sealed and resin encapsulated stator

• 4” NEMA Standard

• Parts in contact with water all made in AISI 304 stainless steel

• Kingsbury thrust bearing system

• AISI 304 stainless steel projection shaft. Made in DUPLEX in motors bigger than 3 Hp

• Removable power cable-connector (KTW, ACS, WRAS approved)

 

MODELS:

• Powers: from 0,5 to 10 Hp

• Frequency: 50 Hz / 60 Hz

• Voltage:

  • Single-phase: PSC type 230 V / 50 Hz - 3-wire 115;230 V / 60 Hz       

  • Three-phase: 230;400 V / 50Hz - 3-wire 230;380;460 V / 60 Hz

• Thrust load:​​​

50 Hz​

from 0,5 to 1 Hp: 2000 N

from 1,5 to 4 Hp: 3000 N

from 4 to 10 Hp: 6500 N

60 Hz

from 0,5 to 0,75 Hp: 2000 N

from 1 to 3 Hp: 3000 N

from 5 to 10 Hp: 6500 N

​

Special versions, available upon request.

 

OPERATING LIMITS:

• Max. immersion depth: 300 m

• Max. pumped liquid temperature: +35°C  (+95°F)

• Min. cooling flow: 0,1 m/s  (0,328 ft/s)

• Max. starts / hour: 30

• Mounting: vertical and / or horizontal

• Degree of protection: IP68

• Insulation class: F

• Voltage tolerance: ± 10%

 

APPLICATIONS:

• Domestic

• Civil

• Industrial

• Agricultural

 

USES:

• Wells

• Water collection tanks

• Fire system

• Pressurization systems

• Irrigation